Stay Signed In
Do you want to access your site more quickly on this computer? Check this box, and your username and password will be remembered for two weeks. Click logout to turn this off.
Stay Safe
Do not check this box if you are using a public computer. You don't want anyone seeing your personal info or messing with your site.
Mardave axle spacers 95p each
Can be purchase from
Twin Wheel Caravan and Chassis for Banger Racing! New chassis provided takes all the work out of going Caravan racing.This caravan is designed as a twin wheel caravan but you can also use it as a single axle . All you need is an Mardave V12 ( axle or two ) , spacers , wheels and tyres .All can be purchased from us. Predrilled for the axle. No bearings needed but you can drill out for them if you prefer. Just cut out the top and screw it together. All you need to do then is paint it and make a simple towing hitch .
The Kamtec Caravan and chassis are made from 2mm ABS white plastic.
This Caravan shell and Chassis is used with a mardave V12 kit but it should work with most car kits including 1:10 Tamiya cars . The parts come in white ABS and are not painted or cut out. The dimensions of the caravan are 450mm long x 160mm wide and 140mm high.
Designed for use in the very popular 1/12th scale Banger Racing series active in most parts of the country. If you have not seen this excellent form of racing please email us or look on BRCA website for clubs. This is as seen in the picture. It is an uncut , unpainted 2 piece moulding. Axle , wheels and tow hook device will need to be made up.
Just place the chassis in to the caravan hold it roughly where you want it to be then reamer a hole. Then just use self taper screws to hold it together!!
We make a simple tow bar that bolts on to the rear of the chassis. You may have a better idea!
Bolt it on the chassis.........
Paint it and then put your axle and spacers in .
Ream a hole in the tow hitch. Place it over the bolt and your ready to go racing!!
